Mesalode Electric Cordless Chainsaw Sharpener Kit - Chain Saw Tool
Mesalode Electric Cordless Chainsaw Sharpener Kit - Chain Saw Tool
BUNDLE & SAVE
Couldn't load pickup availability
Safe & Secure Checkout
256-bit SSL encryption
protects every order.
30-Day Guarantee
Love it or get a full refund.
No hassle.
Mesalode Electric Cordless Chainsaw Sharpener Kit - Chain Saw Tool
- ✓Razor-sharp chain in minutes, no filing skills needed
- ✓Cordless 12V: sharpen on the tailgate, not at the saw shop
- ✓Metal angle guide lines up every tooth at 25°, 30° or 35°
- ✓6 diamond bits fit 1/4", 3/8" LP, .325", 3/8" and .404" chains
plug options
money-back
checkout
Your saw isn't weak.Your chain is dull.
You pull the trigger, lean in, and get a cloud of fine dust. The cut drifts sideways. You end up pushing the saw through the log with your whole body.
Most people blame the saw. It's usually the chain.
Signs your chain is dull
- ✕It throws fine sawdust instead of thick chips
- ✕Cuts pull to one side and come out crooked
- ✕You have to force the saw through the wood
- ✕A 20-minute job eats your whole afternoon
By the time you notice sawdust, your chain has been dull for a while. That's why pros touch up their chain every time they refuel.
A dull chain isn't just slow. The harder you push, the more likely the saw is to grab, bind or kick back.
Until now, you had three bad options.
File it by hand. Slow, tedious and hard on your hands and wrists. Worse, it's nearly impossible to hold the same angle on every tooth, and a few degrees off is enough to make your saw cut in a curve.
Pay the saw shop. $5–$15 a chain, plus the drive, plus the wait. Every single time.
Buy a new chain. $15–$40 each, and the dull ones end up hanging on a nail in the garage.
There's a faster way to get it right.
Shop-sharp chains in your own driveway, in minutes.
MESALODE is a cordless 12V chainsaw sharpener for people who'd rather be cutting than filing. Clamp the bar, set the angle, and give each tooth a few light passes.
The guide shows you the angle, the diamond bit does the work, and you get back to the woodpile.
Choose your plug and orderUS, EU and AU plugs available. 30‑day money‑back guarantee.
Sharp in three steps
Clamp the bar, pick your bit.
Secure the guide bar in a vise, then fit the diamond bit that matches your chain's pitch (chart below).
Line up your angle.
Line the 25°, 30° or 35° mark on the metal guide up with the chain. 30° is the most common; your saw's manual lists the right one.
Give every tooth a few light passes.
Sharpen all the teeth facing one way, then switch to the guide's other scale for the rest. Done in minutes.
Pro tip: Start on a low speed with a light touch. Let the diamond do the cutting; pressing hard only removes extra metal.
Sharpen where the work is.
Corded sharpeners keep you tied to an outlet in the garage. MESALODE runs on a rechargeable 12V battery, so you can touch up your chain on the tailgate, at the woodpile or halfway through a storm cleanup.
When a storm drops a tree across your driveway, you won't be hunting for a file or waiting on the shop.
Same angle on every tooth. Straight cuts again.
Most hand-filed chains cut crooked for one reason: the angle drifts from tooth to tooth. MESALODE's metal guide sits on the chain and marks 25°, 30° and 35° for you, so every cutter gets the same angle.
The result is a saw that tracks straight and throws big, clean chips again, even if you've never sharpened a chain before.
One kit for nearly every chain you own.
Six diamond-coated bits, two of each size, cover the chains on most homeowner, farm and pro saws, from compact pruning saws to full-size workhorses.
Not sure of your pitch? It's usually stamped on the guide bar or printed on the chain box.
Two of each size means a spare is always ready. Bonus: it also works as a cordless mini rotary tool, and the included grinding stones handle light grinding and deburring around the shop.
It pays for itself, then keeps paying.
At $5–$15 a chain, a handful of trips to the saw shop costs as much as MESALODE. After that, every sharpening is free.
You'll stop buying new chains too, because the ones you own keep cutting like new. And a sharp chain cuts faster, so your saw burns less fuel or battery and works less hard.
How MESALODE compares
| MESALODE | Hand file | Saw shop | |
|---|---|---|---|
| Time per chain | Minutes | Slow | Drop-off and wait |
| Same angle every tooth | ✓ | Hard | ✓ |
| Sharpen anywhere | ✓ | ✓ | ✕ |
| Cost each time | Free | Free | $5–$15 |
| Easy on your hands | ✓ | ✕ | ✓ |
| Skill needed | Low | High | None |
US, EU and AU plugs available. 30‑day money‑back guarantee.
Ready to sharpen out of the box.
Specs
Made for people who actually use their saw.
- ✓You heat your home with wood
- ✓You keep fence lines, trails or a farm clear
- ✓You handle your own storm cleanup
- ✓Your hands can't take filing like they used to
- ✓You're done paying someone else for a five-minute job
The gift for the person who already has every tool.
If someone on your list heats with wood, clears storm damage or lives on land, they own a chainsaw, and their chain is probably dull right now.
MESALODE is the gift they'll actually use, every season.
Try it on your own chain, risk-free.
Sharpen your chain, then go cut some wood. If MESALODE doesn't make sharpening faster and easier than what you do now, send it back within 30 days for a full refund.
Questions before you buy? Email support@mesalode.com
Common questions
Will it fit my chainsaw?
If your chain is 1/4", 3/8" Low Profile, .325", 3/8" or .404" pitch, the sizes used on most homeowner, farm and pro saws, yes. The pitch is usually stamped on the guide bar or printed on the chain box. Match it to the bit chart above.
Do I have to take the chain off?
No. Clamp the guide bar in a vise (or a stump vise in the field) and sharpen right on the bar, one tooth at a time, moving the chain forward by hand.
I've never sharpened a chain. Can I do this?
Yes, that's who it's made for. The metal guide shows you the angle. Start on a low speed with light passes; most people find the right touch within the first few teeth.
Will it wear out my chain faster?
Not with a light touch. Quick, light passes remove very little metal. Pressing hard or holding the bit on one tooth is what shortens chain life.
What happens when the bits wear out?
You get two of each size, so a spare is always ready when one wears down.
What about the depth gauges (rakers)?
MESALODE sharpens the cutting teeth. Every few sharpenings, check your depth gauges with a depth gauge tool and a flat file, the same as you would after hand filing.
Is it safe to use?
Yes, with basic care: wear safety glasses and gloves, clamp the bar securely, and make sure the saw can't start. Engine off on gas saws, battery out on cordless saws, unplugged on corded saws.
Which plug will I get?
You choose a US, EU or AU plug when you order. Only the charger plug changes; the sharpener, battery and accessories are the same in every kit.
Stop fighting a dull chain.
Every cut with a dull chain is slower, harder and riskier than it has to be. Get your saw throwing big chips again before your next job.
Choose your plug and orderUS, EU and AU plugs available. 30‑day money‑back guarantee.
