
Clean up rough outside edges
Use the tapered cutter to remove light burrs and refine sharp outer edges on bolts, rods, and similar round workpieces.
storefront FREE SHIPPING OVER $59.99 · WORLDWIDE DELIVERY · 30-DAY RETURNS
Spend $39 more to get FREE shipping!
Subtotal: $0.00
Couldn't load pickup availability
256-bit SSL encryption
protects every order.
Love it or get a full refund.
No hassle.

Clean up burrs and sharp outside edges on suitable round metal workpieces before assembly. The three-flute cutter fits a 1/4-inch hex drill chuck and covers diameters from 5 to 25 mm.

Use the tapered cutter to remove light burrs and refine sharp outer edges on bolts, rods, and similar round workpieces.

The three-flute tungsten-carbide cutting form contacts the workpiece around its outside edge for a controlled finishing pass.

A slow, light pass can leave a rough bolt or rod end cleaner and easier to start into a matching part.

The 6.35 mm / 1/4-inch hex shank mounts in a compatible drill or driver for workshop and repair tasks.
Keep it with your metalworking tools for light finishing after cutting a bolt or rod, preparing a threaded end during a repair, or tidying a round workpiece during fabrication and DIY projects.

The current gallery shows the large cutter's measured profile: a 6.35 mm hex shank, 30 mm tapered cutting section, and a stated 5–25 mm workpiece range.
| Tool type | Three-flute external chamfer / deburring tool |
|---|---|
| Cutting material | Tungsten carbide, as identified in the current gallery |
| Workpiece diameter | 5–25 mm / approximately 3/16–1 in |
| Hex shank | 6.35 mm / 1/4 in |
| Approx. dimensions | 33 mm cutter OD; 28 mm opening ID; 30 mm cutter length; 42 mm shank length |
| Approx. weight | 0.08 kg / 2.82 oz |
1 × large external deburring tool for 5–25 mm workpieces. Drill, workpieces, and other pictured props are not included.
The current gallery states a 5–25 mm diameter range, approximately 3/16–1 inch.
Use a compatible drill or driver chuck that securely accepts the 6.35 mm / 1/4-inch hex shank.
No. It is intended to remove light burrs and clean up an outside edge; it does not replace a die or restore materially missing thread geometry.
Secure the workpiece, wear eye protection, keep hands clear, and use low speed with light pressure. Disconnect power before fitting, checking, or removing the cutter.
